Mazda Auto Lamp Assemblies for South American Distributors
Source aftermarket Mazda headlight, tail light, fog lamp and exterior rear-view mirror assemblies for selected passenger cars, SUVs and pickups. Quotations are prepared against the vehicle model, production period, OE reference, side, configuration, destination market and required quantity.
- OE-reference checking
- LH / RH confirmation
- LHD / RHD review
- Mixed-model wholesale RFQs
- Export packing options
Mazda replacement assemblies shown for product identification. Confirm the application, side, OE reference and supplied configuration before order approval.
Mazda Lighting and Exterior Mirror Assemblies for Trade Orders
Product selection is organized by assembly type and vehicle application. Specification and supplied components vary by SKU, so the requested item should be confirmed before quotation approval.
Mazda Headlight Assemblies
Replacement front lamp assemblies for selected BT-50, Mazda 2 / Demio, Mazda 3, Mazda 6 / Atenza, CX-5, CX-9 and 626 / Cronos applications. Confirm year, facelift, side, lamp technology, connector and traffic system.
Browse Mazda HeadlightsMazda Tail Light Assemblies
Replacement rear lamp assemblies for selected BT-50, Mazda 3, Mazda 6 and CX-5 applications. Confirm body style, production period, left or right side, inner or outer position, connector and lens appearance.
Browse Mazda Tail LightsMazda Fog Lamp Assemblies
Replacement fog lamps and kits for selected Mazda 6 / M6 Skyactiv applications. Confirm bumper version, lamp position, bezel or bracket requirement, connector, lamp technology and kit contents.
Browse Mazda Fog LampsMazda Exterior Rear-View Mirrors
Replacement exterior rear-view mirror assemblies for selected Mazda 2 / Demio, Mazda 3 and CX-5 applications. Confirm vehicle year, side, connector pin count, adjustment, heating, folding, indicator, camera and cover requirements.
Browse Mazda Side MirrorsLooking for a Mazda Model Not Shown on This Page?
For another Mazda passenger car, SUV, pickup or market-specific version, send the complete model, production year or build date, OE reference, required side, destination country and clear product photos. A model list or candidate item can then be checked for your wholesale inquiry.
Mazda Vehicle, SKU and OE Reference Table
Use these references to prepare an RFQ. OE numbers are cross-reference information for identification and do not, by themselves, confirm the final application or supplied configuration.
| Vehicle / Application | Assembly | Internal Reference | OE Reference | Position | Product |
|---|---|---|---|---|---|
| BT-50, 2007–2011 | Headlight | LS-MZDL-064 | R UR82-51-0K0E L UR82-51-0L0E |
Front, LH / RH reference | View product |
| Mazda 3, 2017 | LED headlight | LS-MZDL-088 | BAPK-51-040F BAPK-51-30F |
Front; confirm side and market version | View product |
| Mazda 3 sedan, 2019–2021 | Headlight | LS-UMZDL-005 | BCJH51040K BCJH51030K |
Front; confirm LH / RH and U.S.-model application | View product |
| Mazda 6 / Atenza, 2019–2020 | LED headlight | LS-MZDL-125 | R GRF5-51-030 / 031A L GRF5-51-040 / 041A |
Front, LH / RH reference | View product |
| Mazda 3, 2017 | LED tail light | LS-MZDL-090 | B45B-51-150 B45B-51-160 |
Rear; confirm LH / RH and body style | View product |
| Mazda 6 / M6 Skyactiv, 2013–2016 | Fog lamp kit | LS-MZDL-113 | Confirm from existing label or catalogue | Front lower; confirm kit contents | View product |
| CX-5, 2013 | Exterior mirror | LS-MZB-250 | KR11691G7 KD4569121K |
Side; confirm LH / RH and functions | View product |
Mazda names and OE references are used for application identification. Supplied items are aftermarket replacement assemblies unless the quotation states otherwise.
BT-50 Headlight
Check production period, side, OE reference, connector, beam application and supplied configuration.
Mazda 3 LED Tail Light
Check body style, left or right side, OE reference, connector and supplied components.
Mazda 6 Fog Lamp Kit
Check bumper version, lamp position, bezel, bracket, harness, switch and complete kit contents.
CX-5 Side Mirror
Check side, OE reference, connector pin count, adjustment and other built-in functions.
Verify the Mazda Application Before Quotation Approval
Model names and OE references are useful starting points, but Mazda applications can vary by production period, facelift, body style, traffic system and assembly configuration. Send the available identification details for comparison.
Vehicle Model
State the complete model and body style, such as BT-50, Mazda 2 / Demio, Mazda 3, Mazda 6 / Atenza, CX-5, CX-9 or 626 / Cronos.
Year or Build Date
Provide the production year or build date and indicate whether the vehicle is pre-facelift or facelift.
OE Reference
Send the complete number from the existing unit, label, catalogue or trusted parts record.
Required Side
Specify left, right, a pair, or inner and outer position where the vehicle uses split rear lamps.
Traffic System
Confirm the destination country and whether the required application is for LHD or RHD traffic.
Lamp or Mirror Functions
Identify the lamp technology or the mirror connector and built-in functions required for the application.
Connector & Housing
Provide clear rear photos showing the connector, housing shape, mounting points and module positions.
Order Details
Include quantity by item, destination, packing, labeling and preferred shipping terms.
Verification Process
Submit Vehicle Data
Send the model, year or build date, destination market, OE reference, side and quantity.
Identify Candidate SKU
The available product records are reviewed to identify a candidate internal reference.
Compare Physical Details
Connector, housing, mounting points, lens and included components are compared where records allow.
Define the Offer
The quotation states the selected SKU, side, configuration, quantity, packing and commercial terms.
Approve Before Order
Buyer and supplier confirm the offer details before the order is finalized.
Confirm the Mazda Assembly Configuration by SKU
The same vehicle name can use different assemblies. The quotation should define the supplied configuration instead of relying on the model name alone.
Headlight and Fog Lamp Details
- Halogen, LED, xenon, projector or reflector arrangement
- Low beam, high beam, daytime running light and turn-signal functions
- LHD or RHD beam application where relevant
- Connector, rear cover, mounting points and housing shape
- Bulbs, sockets, wiring, ballast, driver or control module included or excluded
- Left side, right side or pair requirement
- For fog lamps: bumper version, bezel, bracket, switch, harness and kit contents
Tail Light and Exterior Mirror Details
- Sedan, hatchback, SUV, pickup or other body style
- Inner or outer section where the rear lamp is split
- Left side, right side or pair requirement
- Lens appearance, light-function layout, connector and bulb holder
- Supplied components stated for the selected SKU
- For side mirrors: connector pin count, indicator, heating and electric adjustment
- Folding, camera, cover finish and other built-in mirror functions
Inspection, Export Packing and Mixed-Model Orders
Agree the inspection scope, packing method, label information and order list before shipment. Requirements can differ by product, quantity and destination.
Pre-Shipment Checks
The agreed check may cover item reference, quantity, visible condition, lens and housing, mounting points, connector, included components, label and packing. Functional checks depend on the item and agreed inspection scope.
Export Protection
Confirm the inner protection, carton arrangement, separation of left and right items, outer marks and pallet requirement. Packing details should reflect the product size, transport route and buyer instructions.
Labels and Private-Label Requests
State the required SKU, OE cross-reference, side, quantity, barcode, country mark and buyer label format. Feasibility and any setup requirements are confirmed with the quotation.
Mixed Mazda Orders
Distributors can submit a consolidated list covering several Mazda models and assembly types. Include the requested quantity for each internal reference or OE reference so availability, packing and commercial terms can be reviewed.
Multi-Brand Shipment Planning
Mazda items can be reviewed together with other aftermarket lamp requirements. Consolidation depends on item availability, order value, packing method, shipping terms and destination documentation.
Mazda Sourcing Information for South American Buyers
A complete RFQ helps reduce back-and-forth and makes the offered configuration easier to review across procurement, sales and technical teams.
Country and Market Version
State the destination country, vehicle market version and LHD or RHD requirement.
OE and Photo Matching
Send the OE label plus front, rear, connector and mounting-point photos of the existing unit.
Wholesale Order Planning
List quantity by item and indicate whether the order covers several models or product types.
Shipping and Documents
Include the destination port, shipping terms, packing marks and requested commercial documents.
Mazda Auto Lamp Assembly FAQ
Which Mazda assemblies can I request for South America?
You can request selected Mazda headlight, tail light, fog lamp and exterior mirror assemblies for applications including BT-50, Mazda 2 / Demio, Mazda 3, Mazda 6 / Atenza, CX-5, CX-9 and 626 / Cronos. Availability and configuration are confirmed by SKU and order requirements.
What information should I send for Mazda assembly verification?
Send the Mazda model, production year or build date, OE reference, required side, destination country, photos of the existing assembly, connector and rear housing, plus the required quantity.
Is an OE number enough to confirm the correct Mazda part?
An OE reference is useful but should be checked together with the vehicle application, year, side, lamp or mirror functions, connector, housing and market version before the quotation is approved.
Can Mazda LH and RH assemblies be quoted separately?
Yes. State whether you need the left side, right side or a pair. The quotation will identify the offered side and corresponding reference for the selected SKU.
Do Mazda assembly configurations vary by market?
They can vary by country, model year, trim, facelift, LHD or RHD traffic system, lamp technology, connector and built-in functions. The destination market should therefore be included in the RFQ.
Are bulbs, modules, wiring or mirror functions included?
Included components vary by SKU. The offer should specify bulbs, sockets, harnesses, ballasts, LED drivers or modules for lamps, and the connector, indicator, heating, folding or camera functions for mirrors.
Can I combine several Mazda models in one wholesale order?
Mixed-model planning can be discussed for a wholesale order. Send the SKU or OE list, required quantity by item, destination and packing or labeling requirements for review.
Can Mazda assemblies be combined with other brands in one shipment?
Multi-brand shipment planning can be reviewed according to item availability, order value, packing requirements and shipping terms. Provide a consolidated inquiry list for confirmation.
Browse Mazda Lamp Categories and South America Supply
Request a Mazda Bulk Quotation
Send a structured inquiry so the requested application, side, configuration, quantity and commercial requirements can be reviewed together.
- Mazda model and production year or build date
- OE reference and internal reference, if known
- Left, right, pair, inner or outer position
- Destination country and LHD or RHD requirement
- Clear front, rear, connector and label photos
- Quantity required for each item
- Packing, labeling and shipping requirements
Send Your Mazda RFQ
Attach your OE list or product photos and include the destination market. If several models are required, a spreadsheet or consolidated item list is helpful.
Mazda and related vehicle names are trademarks of their respective owners and are used only for application identification. OE references are provided for cross-reference purposes. Product configuration and documentation should be confirmed for the selected SKU and destination market before order approval.